Prusa Research Original Prusa SL1, Manual

Page: 7 / 92

1. Introduction
Original Prusa SL1 kit assembly 7
STEP 3 Use labels for reference
Most of the labels are scaled 1:1 and
can be used to identify the part :-)
For the most common screws, nuts
and PTFE tubes you can also use
the enclosed letter, which contains
Prusa Cheatsheet on the other side.
You can
help.prusa3d.com/cheatsheet from
our site. Print it at 100 %, don't
rescale it, otherwise, it won't work.
Note the displayed label of the bag
is just an example, the content of
the bag might differ. This is valid
for the entire assembly manual.
STEP 4 Spare bag
Every type of fastener is included in
a separate special bag.
If you lose a screw when building,
use one from this bag.
Note the displayed label of the
spare bag is just an example, the
content of the bag might differ.
STEP 5 View high resolution images
When you browse any guide on
help.prusa3d.com , you can view the
original images in high resolution
for clarity.
Just hover your cursor over the
image and click the Magnifier
button ("View original") in the top
left corner.
The picture is used as an example.