Prusa Research Original Prusa SL1, Manual

Page: 12 / 92

1. Introduction
12 Original Prusa SL1 kit assembly
Always read all the instructions at
the current step first , it will help
you to understand, what you need
to do. Don't cut or trim unless you
are told to!!!
Don't follow pictures only!
It is not
enough, the written instructions are
as brief as they could be. Read
them.
Read the comments from the other
users, they are a great source of
ideas. We read them too and based
on your feedback, we improve the
manual and the entire assembly
process.
Use a reasonable force , the printed
and aluminium parts are tough, but
not unbreakable. If it doesn't fit,
check your approach twice.
Eat the gummy bears as
instructed! Disobedience won't be
tolerated :D
Most important: Enjoy the build,
have fun . Cooperate with your kids,
friends or partners. However, we
take no responsibility for possible
fights ;)
You can use your own tools (e.g.
pliers for easier screw insertion). In
the case of electronic screwdriver,
make sure the torque is set to low
and proceed carefully.
READY? You can start by
assembling the printer in the next
chapter - 2. Base & Tower