Prusa Research Original Prusa SL1, Manual

Page: 54 / 92

4. Electronics & Lid
54 Original Prusa SL1 kit assembly
STEP 5 Cable management
Start on the front side of the printer and tie together cable from the tilt motor and
right blower fan.
Continue on the right side and add the cables from the PSU (power + power panic)
to the bundle.
Don't pull the cables, also don't over-tighten the zip tie.
STEP 6 Cable management
Use the cardboard and place the back of the printer on it. Make sure the PSU power
button isn't touching anything.
Gently pull the cables out and place zip tie around them near the right edge of the
circular opening.
Use another zip tie on the other side.
Put the cable bundle back inside the printer, make sure it is all the way back and
won't interfere with the UV LED, which will be mounted to the circular opening in
the upcoming steps.
That is all for now regarding the cable management, we will continue later on in
this chapter.