188
KENR6932
Disassembly and Assembly Section
12.
Install tube assembly (8) to air compressor (5)
and to the cylinder block. Tighten the nuts to a
torque of 9 N·m (80 lb in).
13.
Remove Tooling (B) from hole (X) in the cylinder
block. Install plug (1) to the cylinder block. Refer
to Illustration 377.
14.
If the engine is equipped with a hydraulic pump
on the rear of the air compressor, install the
hydraulic pump.
15.
Connect the air lines to ports (4) and (6) in the
air compressor.
16.
Connect coolant hoses (2) and (3) to air
compressor (5).
17.
Fill the cooling system with coolant to the correct
level. Refer to the Operation and Maintenance
Manual.