10
KENR6932
Disassembly and Assembly Section
9.
Use an allen wrench with a ball end in order to
remove allen head screws (3) that secure the fuel
transfer pump to fuel injection pump (1).
g01335043
Illustration 8
10.
Remove fuel transfer pump (2) from fuel injection
pump (1).
Note:
Do not remove dowels (10) from the fuel
injection pump.
g01335045
Illustration 9
11.
Remove O-ring seal (11) from fuel transfer pump
(2).
i02654512
Fuel Transfer Pump - Install
Installation Procedure
NOTICE
Ensure that all adjustments and repairs that are
carried out to the fuel system are performed by
authorised personnel that have the correct train-
ing.
Before begining ANY work on the fuel system, re-
fer to Operation and Maintenance Manual, “Gen-
eral Hazard Information and High Pressure Fuel
Lines” for safety information.
Refer to System Operation, Testing and Adjusting,
“Cleanliness of Fuel System Components” for de-
tailed information on the standards of cleanliness
that must be observed during ALL work on the fu-
el system.
1.
Ensure that the mating surfaces of fuel injection
pump (1) and fuel transfer pump (2) are clean and
free from damage.
g01335045
Illustration 10
2.
Install a new O-ring seal (11) to fuel transfer pump
(2). Lubricate the O-ring seal with clean engine oil.