KENR6932
187
Disassembly and Assembly Section
g01333453
Illustration 379
Typical air compressor with a DIN drive
5.
Rotate the crankshaft of the air compressor until
the timing mark (X) is aligned with the timing mark
A6 on the rear face of air compressor (5). Refer
to Illustration 378 for air compressors with a SAE
drive. Refer to Illustration 379 for air compressors
with a DIN drive.
g01353470
Illustration 380
Typical example
6.
Align the air compressor (5) with studs (13).
Install the air compressor to the front housing.
If necessary, rotate the crankshaft of the air
compressor in a clockwise direction in order to
align the gears.
Note:
Ensure that timing mark (X) is aligned with
the timing mark A6. Refer to Illustration 378 for air
compressors with a SAE drive. Refer to Illustration
379 for air compressors with a DIN drive.
7.
Install nuts (14). Tighten the nuts to a torque of
78 N·m (58 lb ft).
8.
If necessary, follow Steps 8.a through 8.c in order
to install cover (15).
a.
Install a new O-ring seal (12) to cover (15). Use
Tooling (E) in order to lubricate the O-ring seal.
b.
Install cover (15) to air compressor (5).
c.
Install bolts (16). Tighten the bolts to a torque
of 13 N·m (9.5 lb ft).
g01353469
Illustration 381
Typical example
9.
Position support bracket (10) onto air compressor
(5). Install bolts (9)
fi
nger tight.
10.
Install bolts (11)
fi
nger tight.
11.
Tighten the bolts (9) to a torque of 22 N·m
(16 lb ft). Tighten the bolts (10) to a torque 22 N·m
(16 lb ft).
Note:
Ensure that the air compressor is not stressed
as the bolts are tightened.