KENR6932
141
Disassembly and Assembly Section
g01340606
Illustration 286
Typical example
2.
Ensure that the engine oil pan (7) is clean and free
from damage. Clean the isolating screws (8) and
(9). Inspect the isolating screws for deterioration
or damage. If necessary, replace the isolating
screws. If necessary, ensure that the mating
surface of the isolating frame is clean.
Note:
The isolating screws must be replaced as a
complete set in order to ensure the correct clamping
of the engine oil pan.
3.
Position a new joint (4) onto the engine oil pan (7).
4.
Install the isolating screws (8) and (9) to the
engine oil pan. Do not install the isolating screws
(8) in positions (X). Refer to Illustration 285.
Note:
The isolating screws are held captive by the
joint.
5.
Align the assembly of the engine oil pan with
Tooling (A). Install the assembly of the engine oil
pan to the isolating frame (12). Install the clip that
secures the breather hose in the correct position.