Parker EME
Communication
192-120103 N13 C3I20T11 / C3I32T11 December 2010
301
Connection Compax3 ServoManager <=> Compax3
The Compax3 ServoManager (1) establishes a RS232 connection with modem 1
(PC internal or external).
Modem 1 dials modem 2 via a telephone connection (3).
Modem 2 communicates with Compax3 (6) via RS232.
Configuration
Modem 1 is configured via the Compax3 ServoManager (1)
Modem 2 can be configured via Compax3 (on place), triggered by putting
SSK31
(see on page 398) on X10. For this, the device must be configured before. This can
be made locally before the system / machine is delivered with the aid of the
Compax3 ServoManager (8).
5.3.2.
Configuration of local modem 1
Menu "Options: Communication settings RS232/RS485..." must be opened
Select "Connection via Modem"
Under "name" you can enter a name for the connection
Enter the target telephone number.
Note: If an ISDN telephone system is operated within a company network, an
additional "0" may be required in order to get out of the local system into the
company network before reaching the outside line with an additional "0".
The timeout periods are set to reasonable standard values according to our
experience.
Select the modem type.
For "user-defined modem", additional settings are only required, if the modem
does not support standard AT commands.
Then you can enter special AT commands.
Hint
:When operating the local modem on a telephone system, it may be
necessary to make a blind dialing. Here, the modem does not wait for the
dialing tone.
Select the COM interface where the modem is connected.
Close the window and establish the connection with button
(open/close COM
port).
The connection is interrupted when the COM port is closed.
Select the modem type.
For "user-defined modem", additional settings are only required, if the modem
does not support standard AT commands.
Then you can enter special AT commands.
Hint
:When operating the local modem on a telephone system, it may be
necessary to make a blind dialing. Here, the modem does not wait for the
dialing tone.
