Setting
up Compax3
C3I20T11 / C3I32T11
260
192-120103 N13 C3I20T11 / C3I32T11 December 2010
Example backlash: (for example in gearboxes)
Here, non-linearities are caused, if the tooth edges will turn from one side to the
other during measurement. The reason for this is a change of the sign of the force
transmitted by the gearbox.
In order to avoid this, you can try to transmit a constant torque by keeping a
constant speed and to avoid a change of the sign during the measurement by
choosing a relatively small excitation amplitude.
