Setting
up Compax3
C3I20T11 / C3I32T11
184
192-120103 N13 C3I20T11 / C3I32T11 December 2010
motor parameters resulting from the motor library or from shifting the reference
point on the "motor reference point" wizard page.
Limit and Monitoring Settings wizard page:
1: Current (Torque) Limit
2: Velocity limit
Asynchronous motors
In this chapter you can read about:
Type specification plate data ......................................................................................... 184
Replacement switching diagram - data for a phase ........................................................ 184
Slip Frequency .............................................................................................................. 185
Saturation behavior ....................................................................................................... 186
Cut-off frequency for the field weakening range ............................................................. 186
Rotor time constant ....................................................................................................... 187
Determination of the commutation settings .................................................................... 187
Asynchronous motors: Extension of the controller structure ........................................... 187
Type specification plate data
On the 2nd. wizard page of the Compax3 MotorManager, the type specification
plate data must be entered.
Replacement switching diagram - data for a phase
This data can be obtained from the manufacturer or be determined by
measurement.
