Panasonic Toughbook CF-73 Series Reference Manual Download Page 68

Page: 68 / 159

SD Memory Card

Inserting the Card

Remove the dummy card (A) if it is inserted.

Press the dummy card.
It will come out of the slot a little bit.

Pull it all the way out.

If you try to force the dummy card out of the slot while it is locked in place,
the slot may be damaged.

Insert the SD Memory Card firmly with the label side facing up and
with the cut corner in front.

CAUTION

Make sure you insert the card in the proper direction. If the card is inserted in the
wrong direction, the card or slot may be damaged.

Inserting/Removing the SD Memory Card

Summary of Contents for Toughbook CF-73 Series
































































































































































Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands

Panasonic Toughbook CF-73 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands