60
B's Recorder/B's CLiP
Disc cover opens automatically
When B's Recorder is finished writing, the disk cover opens automatically. You can
change the settings for B's Recorder so that the disk cover does not open automatically. If
you select [OK] after writing, however, the disk cover will open regardless of the settings.
Do not know recommended disc
Refer to "When Using CD-R/RW Discs" (
) for information about recommended
discs.
To format disc using B’s CLiP
Discs formatted or written using methods other than B's CLiP cannot be used.
Therefore, right-click
or
and then select [Format].
After formatting the disc, if the disc does not mount (is not recognized), remove it, and
insert it again.
Eject the formatted discs as described below.
When ejecting the disc while
is displayed on the taskbar
Right-click
and select [Eject].
Do not eject discs in any other way except the one described above.
If you cannot eject the disc even after attempting the operation described above, shut
down Windows. After the power is off, insert a pointed object (e.g., the bent-out tip of a
paper clip, or the tip of a ballpoint pen) into the emergency hole (A) and move it in the
direction of the arrow.
To disable B's CLiP when it is not used
Make the settings following the steps below
A
Log on to Windows with the administrator authority.
B
Select [start] - [All Programs] - [B.H.A] - [B's CLiP] - [B’s Config].
Notes During Use