![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-73-series/toughbook-cf-73-series_reference-manual_264576143.webp)
143
Dealing with Problems (Advanced)
Communications with access point are
cut off
Shorten the distance between the computer and the access point, and try the
detection again.
If there are multiple access points aside from the access point to which this
computer is connected, confirm that different channels have been set for each
access point.
Unable to connect to a network
Is the IP address of the access point wrong?
Following the operating instructions of the access point, set the IP address of
the access point again correctly.
Cannot communicate via an ADSL, or
cable modem
Check to see whether IP address and DHCP server settings are set as
indicated by Internet Service Providers (ISP).
Cannot set wireless LAN to [Enable] or
[Disable]
It may become impossible to set the wireless LAN to [Enable] or [Disable] if
these settings are changed repeatedly on the [Network Connection] screen. In
this case, restart the computer.
Press
F9
key in the Setup Utility. This will restore the Setup Utility's settings to
their default values (except the password settings).
is not displayed (or has disap-
peared)
To display
, perform the following procedure.
A
Select [start] - [Control Panel] - [Network and Internet Connections] -
[Network Connections].
B
Right-click [Wireless Network Connection], and select [Properties].
C
Add a check mark for [Show icon in notification area when connected],
and then select [OK].
The Wireless LAN Switch icon (
or
) is not displayed.
Enable the wireless LAN using [Device Manager] or the Setup Utility.
Networking: Wireless LAN (only for models with wireless LAN)