Panasonic Toughbook CF-73 Series Reference Manual Download Page 112

Page: 112 / 159

112

Hard Disk Drive

Remove the hard disk drive.

Inserting the hard disk drive

Insert the hard disk drive as shown in the figure until it clicks into place.

Slide the cover in the direction of the arrow in the figure.

Slide the latch to the lock position ( ).

Insert the battery pack. (

page 41

)

CAUTION

Be sure to insert the hard disk drive as illustrated.
Confirm that the latch lock is correctly in place. If you carry your computer without the
latch lock in place, the hard disk drive may fall out.

NOTE

Whether the hard disk is properly recognized or not can be confirmed in [Information]
menu of the Setup Utility (

page 115

). If the hard disk is not recognized, power off

the computer and insert it again.

Summary of Contents for Toughbook CF-73 Series
































































































































































Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands

Panasonic Toughbook CF-73 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands