Panasonic Toughbook CF-73 Series, Reference Manual

Page: 148 / 159

148
Dealing with Problems (Advanced)
Unable to read/write to the hard disk Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
You cannot use a hard disk drive for which [Enable] has been selected in the
[Hard Disk Lock] setting of the Setup Utility by another computer.
Your hard disk content may be corrupted. Contact Panasonic Technical
Support.
Trouble has occurred with the disc set
in the CD/DVD drive You may need to clean the lens or disc.
• Cleaning the lens
page 46
• Cleaning the disc page 50
The multimedia pocket device status
indicator does not light
Is the disc set correctly?
The computer does not recognize the
CD/DVD drive Remove the CD/DVD drive, and then insert it again. ( page 42 )
Cannot play disc or read data from it Is the disc bent, scratched, or dirty?
Cannot play back TV programs
recorded on a commercial DVD
recorder In the following cases, finalize the recording on the DVD recorder.
• When the program was recorded in DVD-R/RW in video mode.
• When the program was recorded in DVD-RW in VR mode.
Cannot play music CD or DVD-Video
automatically after setting it in the CD/
DVD drive Remove the disc and reinsert it. If the problem persists, run the applicable
software and play.
A blue background appears on the
screen with the MPEG image Did you open the CD/DVD drive or remove the MPEG disc while it was
operating?
Re-insert the MPEG disc and close the CD/DVD drive.
If the CD/DVD drive vibrates
excessively or is noisy Is the disc bent or labeled?
Check to see if the disc is inserted correctly, and check that the disc is in good
condition. If the disc is good and inserted correctly, set [CD/DVD Drive Speed]
to [Low] in the Setup Utility. (
page 116 )
When writing to a CD using B’s Recorder, you can minimize vibration while
writing by setting the writing speed at [8x] or less.
Disk Operations