Panasonic Toughbook CF-73 Series Reference Manual Download Page 53

Page: 53 / 159

WinDVD

WinDVD is a software application for DVD playback.
Here you will find explanations and general information on precautions to take.
Refer to the online manual for the detailed use of the software application. (

page 54

)

You can run WinDVD using either of the following procedures.

Double-click

on the desktop.

Select [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].

To play back DVD-Audio using WinDVD;

DVD-Audio cannot be played back on WinDVD.

Do not start WinDVD under the following conditions:

While the hard disk drive indicator

is blinking immediately after the computer is turned

on.

While WinDVD is running, do not perform the following:

Entering the standby or hibernation mode
Switching the display by pressing

During video playback, do not perform the following:

Ejecting the disc
Using other applications or the Command Prompt
Changing the settings of the screen properties

Running WinDVD

Usage Precautions

Summary of Contents for Toughbook CF-73 Series
































































































































































Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands

Panasonic Toughbook CF-73 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands