Panasonic Toughbook CF-73 Series Reference Manual Download Page 110

Page: 110 / 159

110

Wireless LAN

Check status of the wireless LAN, 802.11a and Bluetooth (only
for models with Bluetooth)

Put the cursor over the Wireless Switch Utility icon

(

)

Status of the wireless LAN, 802.11a and Bluetooth (only for models with Bluetooth)
will be displayed.

To communicate between two computers using the wireless LAN and without using an
access point, make the following settings on each computer.

Set the network to be accessed as [Device to device (Ad hoc)].

Set the network names to the same name.

Set the network authentication to the same authentication.

When using encryption, set the same encryption and the same network key on both
computers.

Exchanging Data between Computers Using the Wireless LAN

Summary of Contents for Toughbook CF-73 Series
































































































































































Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands

Panasonic Toughbook CF-73 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-73 Series

Reviews:

Related manuals for Toughbook CF-73 Series

Brands by name

Popular brands