background image

iDEQ-T1 IN294KT1 Setup Manual 

 

FCC Information and Copyright 

 

This equipment has been tested and found to comply with the limits of a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. There is no guarantee that interference will not 
occur in a particular installation. 

 

The vendor makes no representations or warranties with respect to the contents here 
and specially disclaims any implied warranties of merchantability or fitness for any 
purpose. Further the vendor reserves the right to revise this publication and to make 
changes to the contents here without obligation to notify any party beforehand. 

Duplication of this publication, in part or in whole, is not allowed without first obtaining 
the vendor’s approval in writing. 

 

The content of this user’s manual is subject to be changed without notice and we will 
not be responsible for any mistakes found in this user’s manual. All the brand and 
product names are trademarks of their respective companies. 

Summary of Contents for iDEQ-T1 IN294KT1






















































Reviews: