Panasonic PT-RZ16K Operating Instructions (Functional Manual) Download Page 76

Page: 76 / 277

Chapter 3

Basic Operations — Projecting

76 - ENGLISH

Moving the projection lens to the home position

Operate in following procedure to move the projection lens to the home position.

When operating from the main menu

1) Press the <MENU> button.

The

[MAIN MENU]

screen is displayed.

2) Press

to select [PROJECTOR SETUP].

3) Press the <ENTER> button.

The

[PROJECTOR SETUP]

screen is displayed.

4) Press

to select [LENS].

5) Press the <ENTER> button.

The

[LENS]

screen is displayed.

6) Press

to select [LENS HOME POSITION].

7) Press the <ENTER> button.

The confirmation screen is displayed.

8) Press

to select [OK], and press the <ENTER> button.

[PROGRESS] is displayed in the

[HOME POSITION]

screen, and the projection lens is moved to the origin

position.

Note

[LENS HOME POSITION] cannot be executed when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS TYPE] is set to [NOT

SELECTED].

[LENS HOME POSITION] will not operate correctly when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS TYPE] is set incorrectly.

Change the setting if the type is different from the projection lens attached to the projector.

The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS CALIBRATION]

is not executed.

The home position does not match with the optical image center position.

The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (

page 77).

The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.

When operating from the lens shift adjustment screen

1) Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.

The confirmation screen is displayed.

2) Press

to select [OK], and press the <ENTER> button.

[PROGRESS] is displayed in the

[HOME POSITION]

screen, and the projection lens is moved to the origin

position.

Note

The

[HOME POSITION]

screen is not displayed when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS TYPE] is set to [NOT

SELECTED].

The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS TYPE] is set

incorrectly. Change the setting if the type is different from the projection lens attached to the projector.

The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu

→

[LENS]

→

[LENS CALIBRATION]

is not executed.

The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (

page 77).

The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.

The [HOME POSITION] screen can also be displayed by pressing the <LENS> button on the control panel or the <SHIFT> button on the

remote control for three seconds or longer.

Summary of Contents for PT-RZ16K






















































































































































































































































































Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands