Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Page: 115 / 277

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 115
Note
f
When the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] → [MODE] is set to [SUB], [FRAME DELAY] cannot be set. In such
case, the projector will operate according to the [FRAME DELAY] setting of the projector where the [PROJECTOR SETUP] menu → [MULTI
PROJECTOR SYNC] → [MODE] is set to [MAIN].
[FRAME CREATION]
Set the amount of image frame interpolation.
The image with fast movement can be displayed more smoothly by automatically generating the intermediate
frame from the previous and next frame.
1) Press
as
to select [FRAME CREATION].
2) Press the <ENTER> button.
f
The [FRAME CREATION] screen is displayed.
3) Press
as
to select [FRAME CREATION MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Disables the frame creation function.
[1] Sets the amount of interpolation weaker.
[2] Sets the amount of interpolation midway.
[3] Sets the amount of interpolation stronger.
Note
f
The effect may not be easily visible depending on the image.
f
Switch the setting when the image looks unnatural due to delay of image or generation of noise.
f
[FRAME CREATION] is fixed to [OFF] in the following cases.
g
When [FRAME RESPONSE] is set to [FAST]
g
When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(3D)] or [AUTO(2D)] and displaying an image in
simultaneous format
g
When the internal test patter is displayed.
f
The [FRAME CREATION] setting is disabled and fixed to [OFF] when [FRAME CREATION] is set to anything other than [OFF] and the
following setting or operation is performed.
g
Set [FRAME RESPONSE] to [FAST].
g
Set the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] to [AUTO(3D)] or [AUTO(2D)] to display an image in simultaneous format
Setting [FILM DETECTION]
Set the film detection function to enhance the video resolution by determining if it is a content that the telecine is
performed on the input signal.
1) Press
as
to select [FRAME CREATION].
2) Press the <ENTER> button.
f
The [FRAME CREATION] screen is displayed.
3) Press
as
to select [FRAME CREATION MODE].
4) Press
qw
to select a mode from [1], [2], or [3].
5) Press
as
to select [FILM DETECTION].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Disables the film detection function.
[ON]
Enables the film detection function. The video resolution is enhanced for the contents that telecine is
performed on the input signal.
Note
f
The video resolution is not changed even if [FILM DETECTION] is set to [ON] for the contents that the telecine is not performed on the input
signal.
The contents which telecine is performed is the contents that the film image is converted to the video image.