Panasonic PT-RZ16K Operating Instructions (Functional Manual) Download Page 37

Page: 37 / 277

Chapter 2

Getting Started — Setting up

ENGLISH - 37

(Unit: m)

Projection lens Model No.

Lens protrusion dimension (L1) (approximate value)

ET-D3LEW10

0.210

ET-D75LE10

0.125

ET-D3LES20/ET-D75LE20

0.121

ET-D3LET30

0.180

ET-D75LE30

0.121

ET-D3LET40

0.130

ET-D75LE40

0.124

ET-D3LEW50/ET-D75LE50

0.203

ET-D3LEW60/ET-D75LE6

0.212

ET-D3LET80/ET-D75LE8

0.262

Note

For the adjustment range of the projected image position with the lens shift, refer to “Lens shift range” (

page 77).

ET-D3LEU100, ET-D3LEW200

L1 L2

L (LW/LT)

Projected image

Screen

Lens optical axis

Note

This illustration is prepared on the assumption that the projected image size and position have been aligned to fit full in the screen.

This illustration is not in accurate scale.

The lens optical axis is the symmetrical axis passing through the center of the optical image system. This does not match with the image

center position at the home position. The home position is an origin position of the lens shift (vertical position and horizontal position of the

lens) based on the calibration result.

Projected image height

Projected image width

Projected image size

(LW/LT)

Projection distance (distance from the front end of the projection lens to the screen)

Lens protrusion dimension (distance from the front surface of the projector to the forward end of the

projection lens)

Position of the lens optical axis (distance from the front surface of the projector to the lens optical axis)

Position of the lens apex (distance from the side of the projector to the lens apex)

For details about calculating the projection distance, refer to “Formula for calculating the projection distance per projection lens” (

page 48).

*2 LW: Minimum projection distance when the Zoom Lens is used

LT: Maximum projection distance when the Zoom Lens is used

(Unit: m)

Projection lens Model No.

Lens protrusion dimension (L1)

(approximate value)

Position of the lens optical axis

(L2)

(approximate value)

Position of the lens apex (L3)

(approximate value)

ET-D3LEU100

0.29

0.21

0.10

ET-D3LEW200

0.35

0.26

0.13

Note

For the adjustment range of the projected image position with the lens shift, refer to “Lens shift range” (

page 77).

Summary of Contents for PT-RZ16K






















































































































































































































































































Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands