manualshive.com logo in svg

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

The Panasonic PT-RZ16K is a high-quality projector featuring advanced technology for superior image projection. Ensure optimal functionality with the Operating Instructions (Functional Manual), available for download free of charge. Access the manual at manualshive.com to gain insights on maximizing the potential of this remarkable product.

Share
Download
background image

Chapter 4

 

Settings — [PROJECTOR SETUP] menu

146 - ENGLISH

[CEILING]

Select this item when installing the projector with the top surface of the projector facing down such as 

ceiling attachment.

Projected image is inverted upside down.

Note

 

f

Refer to “Angle sensor” (

x

 page 35) for details on the range of the installation attitude that can be detected by the built-in angle sensor.

[LENS]

Perform the setting and operation regarding the projection lens.

[LENS TYPE]

When the projector is used for the first time or when the projection lens is replaced, confirm the [LENS TYPE] 

setting. Change the setting if the type is different from the projection lens attached to the projector.
If the [LENS TYPE] information is written into the EEPROM (Electrically Erasable Programmable Read-Only 

Memory) built in the projection lens, that information is automatically acquired as the setting value of the projector 

when the projector is turned on.

1)  Press 

as

 to select [LENS].

2)  Press the <ENTER> button.

 

f

The 

[LENS]

 screen is displayed, allowing to confirm the current setting in [LENS TYPE].

 

f

To change the setting, proceed to Step 

3)

.

3)  Press 

as

 to select [LENS TYPE].

4)  Press the <ENTER> button.

 

f

The 

[LENS TYPE]

 screen is displayed.

5)  Press 

as

 to select an item.

 

f

Select the type of projection lens attached to the projector.

ET-D75LE95

Select this item when the Fixed-focus Lens (Model No.: ET-D75LE95) is attached to the projector.

ET-D75LE90

Select this item when the Fixed-focus Lens (Model No.: ET-D75LE90) is attached to the projector.

ET-D75LE50

Select this item when the Fixed-focus Lens (Model No.: ET-D75LE50) is attached to the projector.

ET-D75LE6

Select this item when the Zoom Lens (Model No.: ET-D75LE6) is attached to the projector.

ET-D75LE10

Select this item when the Zoom Lens (Model No.: ET-D75LE10) is attached to the projector.

ET-D75LE20

Select this item when the Zoom Lens (Model No.: ET-D75LE20) is attached to the projector. (Factory 

default setting)

ET-D75LE30

Select this item when the Zoom Lens (Model No.: ET-D75LE30) is attached to the projector.

ET-D75LE40

Select this item when the Zoom Lens (Model No.: ET-D75LE40) is attached to the projector.

ET-D75LE8

Select this item when the Zoom Lens (Model No.: ET-D75LE8) is attached to the projector.

6)  Press the <ENTER> button.

Note

 

f

If a projection lens equipped with EEPROM is attached, the [LENS TYPE] setting is written into the EEPROM of the projection lens. If a 

projection lens without built-in EEPROM is attached, the [LENS TYPE] setting is saved in the projector as user data.

 

f

If the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, 

ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), [LENS TYPE] is set to 

[NOT SELECTED] when it is used for the first time. By selecting the type of the projection lens and pressing the <ENTER> button, selected 

[LENS TYPE] information is written to the EEPROM installed in the stepping motor unit.

 

f

[LENS HOME POSITION], [ACTIVE FOCUS OPTIMIZER], and [LENS CALIBRATION] cannot be executed when [LENS TYPE] is set to 

[NOT SELECTED].

 

f

[LENS HOME POSITION], [ACTIVE FOCUS OPTIMIZER], and [LENS CALIBRATION] will not operate correctly when [LENS TYPE] is set 

incorrectly.

 

f

When a projection lens equipped with EEPROM is attached, [LENS TYPE] will not return to factory default setting even if the [PROJECTOR 

SETUP] menu 

→

 [INITIALIZE] 

→

 [ALL USER DATA] is executed.

Summary of Contents for PT-RZ16K






















































































































































































































































































Reviews:

No comments

Related manuals for PT-RZ16K

Samsung SP-P310ME User Manual preview
SP-P310ME
Brand: Samsung Pages: 32
Samsung SP-H03 Manual Del Usuario preview
SP-H03
Brand: Samsung Pages: 57
Samsung SP-LSP7TFA Quick Setup Manual preview
SP-LSP7TFA
Brand: Samsung Pages: 2
3M Overhead Projector 2660 Operating Instructions Manual preview
Overhead Projector 2660
Brand: 3M Pages: 12
3M Multimedia Projector X65 Quick Start Manual preview
Multimedia Projector X65
Brand: 3M Pages: 6
3M Multimedia Projector X62w Operator'S Manual preview
Multimedia Projector X62w
Brand: 3M Pages: 71
NEC NP-L50W Quick Setup Manual preview
NP-L50W
Brand: NEC Pages: 1
M-system MDP-D Series Instruction Manual preview
MDP-D Series
Brand: M-system Pages: 3
Vankyo Leisure 410 User Manual preview
Leisure 410
Brand: Vankyo Pages: 39
paco SWR-3000VA Instruction Manual preview
SWR-3000VA
Brand: paco Pages: 15
Barco R5975039 Owner'S Manual preview
R5975039
Brand: Barco Pages: 50
Elite Screens Insta-DE Screen User Manual preview
Insta-DE Screen
Brand: Elite Screens Pages: 8
BOXLIGHT CP-12t User Manual preview
CP-12t
Brand: BOXLIGHT Pages: 44
Digital Projection TITAN LASER WUXGA Installation & Quick Start Manual preview
TITAN LASER WUXGA
Brand: Digital Projection Pages: 137
Eiki LC-XT4 Owner'S Instruction Manual preview
LC-XT4
Brand: Eiki Pages: 56
Patton electronics 515 DB-15 User Manual preview
515 DB-15
Brand: Patton electronics Pages: 4
Brother HL-2600CN Series Service Manual preview
HL-2600CN Series
Brand: Brother Pages: 385
Brother HL-2600CN Series Driver Installation Manual preview
HL-2600CN Series
Brand: Brother Pages: 2

Brands by name

Popular brands

Load more brands