Panasonic PT-RZ16K Operating Instructions (Functional Manual) Download Page 121

Page: 121 / 277

Chapter 4

Settings — [3D SETTINGS] menu

ENGLISH - 121

[0.5ms]

Sets an item so that 3D setting is made correctly.

[1.0ms]
[1.5ms]
[2.0ms]
[2.5ms]
[2.7ms]

Note

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use.

[3D TEST MODE]

Set the image display mode for use with 3D system adjustments.

1) Press

to select [3D TEST MODE].

2) Press

to switch the item.

[NORMAL]

Normal setting.

[LEFT/LEFT]

Displays the image of the left eye input signal for both the left and right eye image.

[RIGHT/RIGHT]

Displays the image of the right eye input signal for both the left and right eye images.

[LEFT/BLACK]

Displays the image of the left eye input signal for the left eye image, and all black images for the right

eye image.

[BLACK/RIGHT]

Displays all black images for the left eye image, and the image of the right eye input signal for the

right eye image.

Note

The [3D TEST MODE] setting returns to [NORMAL] when the projector is switched off.

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

This function is disabled when [3D TEST PATTERN] is displayed.

[3D TEST PATTERN]

The 3D test pattern can be used to check operation and make adjustments even without a 3D signal.

1) Press

to select [3D TEST PATTERN].

2) Press

to switch the item.

Menu input screen

Select a test pattern that is easy to check operation or make adjustment.

Menu left: black/

right: white

Menu left: white/

right: black

Menu alternate

display of left/right

Menu alternate

display of right/left

Note

When the [DISPLAY OPTION] menu

→

[RGB IN]

→

[RGB1 INPUT SETTING] (

page 128) is set to [VIDEO] or [Y/C], the 3D test pattern

cannot be displayed while the <RGB 1 IN> terminal is selected.

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

Summary of Contents for PT-RZ16K






















































































































































































































































































Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands