Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Page: 177 / 277

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 177
[NETWORK/E-MAIL]
Returns the setting items under the [NETWORK] menu and the setting items under the [Detailed set
up] page and the Crestron Connected operation page of the web control screen to the factory default
settings.
f
The [NETWORK] menu → [Art-Net] → [Art-Net CHANNEL SETTING] does not return to the factory
default setting.
f
The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
[UNIFORMITY] Returns [UNIFORMITY] to factory default setting.
5) Press the <ENTER> button.
f
The confirmation screen is displayed.
6) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
The following settings are not initialized even if [ALL USER DATA] is executed.
g
The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE]
g
The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [MAX LIGHT OUTPUT LEVEL]
g
The [PROJECTOR SETUP] menu → [STANDBY MODE]
g
The [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [FOCUS OFFSET SETUP] → [FOCUS OFFSET
BRIGHT] and [FOCUS OFFSET DARK]
f
When a projection lens equipped with EEPROM is attached, following setting will not return to factory default setting even if [ALL USER
DATA] is executed.
g
The [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE]
g
The [PROJECTOR SETUP] menu → [LENS] → [LENS INFORMATION SETTING] → [LENS ID] and [LENS NAME]
f
To initialize the setting values of [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] in the [PROJECTOR SETUP] menu → [LENS]
→ [ACTIVE FOCUS OPTIMIZER] → [FOCUS OFFSET SETUP], execute the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS
OPTIMIZER] → [FOCUS OFFSET SETUP] → [INITIALIZE].
f
If [ALL USER DATA] is executed, the [INITIAL SETTING] screen is displayed when the projection is started the next time.
[SERVICE PASSWORD]
This function is used by a service person.