Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Page: 135 / 277

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 135
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f
When [DUAL LINK SETTING] is selected, proceed to Step 5) .
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press
as
to select [3G-SDI MAPPING].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes the mapping method to 3G-SDI Level-A.
[LEVEL B] Fixes the mapping method to 3G-SDI Level-B.
Note
f
This does not operate when the SD-SDI signal or the HD-SDI signal is input.
Setting [SYSTEM SELECTOR] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The [SDI IN] screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f
When [DUAL LINK SETTING] is selected, proceed to Step 5) .
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press
as
to select [SYSTEM SELECTOR].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Automatically selects [RGB], [YP
B
P
R
4:4:4], [YP
B
P
R
4:2:2], or [XYZ].
[RGB], [YP
B
P
R
4:4:4], [YP
B
P
R
4:2:2], or [XYZ] is automatically selected by reading the payload ID
attached to the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
[RGB] Fixes to [RGB].
[YP
B
P
R
4:4:4] Fixes to [YP
B
P
R
4:4:4].
[YP
B
P
R
4:2:2] Fixes to [YP
B
P
R
4:2:2].
[XYZ]
Fixes to [XYZ].
Setting [BIT DEPTH] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The [SDI IN] screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f
The
[SINGLE LINK SETTING]
or
[DUAL LINK SETTING]
screen is displayed.
f
When [DUAL LINK SETTING] is selected, proceed to Step 5) .
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
or
[DUAL LINK SETTING]
screen of the selected item is displayed.