Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Page: 114 / 277

Chapter 4 Settings — [ADVANCED MENU] menu
114 - ENGLISH
2) Press
qw
to select [ON] or [USER].
3) Press the <ENTER> button.
f
The [EDGE BLENDING] screen is displayed.
4) Press
as
to select [BLACK LEVEL ADJUST].
5) Press the <ENTER> button.
f
The [BLACK LEVEL ADJUST] screen is displayed.
6) Press
as
to select [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], or [RIGHT
FREE SHAPE] to initialize.
7) Press the <ENTER> button.
f
The [UPPER FREE SHAPE] screen, the [LOWER FREE SHAPE] screen, the [LEFT FREE SHAPE]
screen, or the [RIGHT FREE SHAPE] screen is displayed.
8) Press
as
to select [INITIALIZE].
9) Press the <ENTER> button.
f
The confirmation screen is displayed.
10) Press
qw
to select [EXECUTE], and press the <ENTER> button.
Note
f
The adjustment data for [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], and [RIGHT FREE SHAPE] cannot be
initialized at once.
f
To initialize all the adjustment data, select each item and execute [INITIALIZE] individually.
f
When the projector is initialized by the following method, all data in [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE
SHAPE], and [RIGHT FREE SHAPE] are initialized.
g
When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA]
[FRAME RESPONSE]
Set the processing method of the image frame delay.
1) Press
as
to select [FRAME RESPONSE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1
Simplifies the image processing to reduce image frame delay.
[FIXED]
*2
Sets image frame delay to be constant regardless of the image position or magnification.
*1 When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only when moving image signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f
[DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST].
f
[FRAME RESPONSE] cannot be set during P IN P.
[FRAME DELAY]
Set the additional delay time against the frame delay status by the [FRAME RESPONSE] setting.
1) Press
as
to select [FRAME DELAY].
2) Press the <ENTER> button.
f
The [FRAME DELAY] screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[+0.00ms] - [+100.00ms] Sets the delay in 0.01 ms increments.
f
The delay time (approximate) from the point the video signal is input until the image is projected is
displayed in [ACTUAL DELAY] of the [FRAME DELAY] screen.