Chapter 3
Basic Operations — Switching on/off the projector
ENGLISH - 59
Switching on/off the projector
Connecting the power cord
To prevent disconnection of the power cord, use the supplied power cord and securely insert all the way
in to fix it.
Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the supplied power cord.
Use the power cord matching with the power supply voltage and the shape of the outlet.
For details of power cord handling, refer to “Read this first!” (
x
page 5). For the shape of the outlet, refer to
“Usable outlet” (
x
page 34).
Note
f
The supplied power cords vary depending on the country or region where you purchased the product.
How to attach the power cord
Fig. 3
Fig. 2
Fig. 1
Power cord holder
1) Confirm that the power cord holder is raised so that the power cord can be inserted. (Fig. 1)
2) Check the shapes of the <AC IN> terminal on the side of the projector and the power cord connector,
then insert the connector completely in the correct direction. (Fig. 2)
3) Lower the power cord holder so it snaps onto the power cord, and fix the power cord. (Fig. 3)
How to remove the power cord
When using the power cord with the lock button
Fig. 1
Fig. 2
Lock button
1) Confirm that the <MAIN POWER> switch on the side of the projector is on the <OFF> side, and
remove the power plug from the outlet.
2) Raise the power cord holder fixing the power cord upward. (Fig. 1)
f
Fix the power cord holder by snapping into the projector.
3) Remove the power cord connector from the <AC IN> terminal of the projector while pressing the lock
button. (Fig. 2)
