Panasonic PT-RZ16K Operating Instructions (Functional Manual) Download Page 228

Page: 228 / 277

Chapter 5

Operations — Updating the firmware

228 - ENGLISH

9) Click [Next].

The update confirmation screen is displayed.

10) Click [Start].

Update is started.

The light source indicator <LIGHT1> and the light source indicator <LIGHT2> on the projector blink in red

alternately while updating.

Elapsed time and rough progress can be confirmed in the update status display screen. The required time

is approximately 15 minutes.

11) Confirm the completion of the update.

Once the update is completed, the completion confirmation screen is displayed.

To continue to update the firmware of another projector, click [Yes]. The connection setting screen in Step

is displayed.

To end the update tool, click [No].

12) Confirm the firmware version.

Turn on the power of the projector and confirm the firmware version in the

[STATUS]

screen.

Attention

Do not turn off the main power of the projector or disconnect the LAN cable while updating.

Summary of Contents for PT-RZ16K






















































































































































































































































































Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands