Panasonic PT-RZ16K Operating Instructions (Functional Manual) Download Page 81

Page: 81 / 277

Chapter 3

Basic Operations — Operating with the remote control

ENGLISH - 81

Operating with the remote control

Using the shutter function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible

to turn off the image temporarily.

button

1) Press the <SHUTTER> button.

The image disappears.

This operation can be also performed using the <SHUTTER> button on the control panel.

2) Press the <SHUTTER> button again.

The image is displayed.

Note

The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).

You can set whether to use the mechanical shutter or not and the time for the fade in/fade out of the image using the [DISPLAY OPTION]

→

[SHUTTER SETTING].

If [MECHANICAL SHUTTER] in the [DISPLAY OPTION] menu

→

[SHUTTER SETTING] (

page 140) is set to [DISABLE], the light source

may be lit dimly due to warm-up when the shutter function is used while the operating environment temperature is around 0 °C (32 °F).

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen

display, such as the menu or the input terminal name.

button

1) Press the <ON SCREEN> button.

Turns off (hides) the on-screen display.

2) Press the <ON SCREEN> button again.

Cancels the hide condition of the on-screen display.

Summary of Contents for PT-RZ16K






















































































































































































































































































Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands

Panasonic PT-RZ16K, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-RZ16K

Reviews:

Related manuals for PT-RZ16K

Brands by name

Popular brands