Panasonic LP-RF Series, Setup & Maintenance Manual

Page: 19 / 218

19
1-2 Product Configuration
1-2-1 Basic composition
This product is a laser marker designed to mark and process the object by radiating a laser beam to the target.
The laser marker LP-RF series consists of the following units mainly.
ABCD
t
r
u
q
y
e
w
No. Name Description
q
Head It is the unit that radiates the laser beam. The optical parts and the
scanner are loaded inside.
w
Controller It is the unit that generates the marking data. The laser oscillator,
the main power supply and connection interface with external
devices are loaded.
e
Unit power cable (Attached accessory)
Signal cable (Attached accessory)
Fiber cable
Cables to connect the head and controller.
The fiber cable delivers the laser beam from controller to head.
r
AC power cable (Optional item) Cable to supply AC power to the controller. Purchase the specified
optional cable or a cable with the enough rating capacity to fulfil the
power voltage specification of this product, which is compliant with
the standards in the country or region where it is used.
t
USB cable (Attached accessory) Cable to connect the laser marker with a PC.
y
Commercially available PC
(Not included in this product.)
Install the attached software “Laser Marker Smart Utility” onto a PC
and set the marking data of the laser marker. You can use this PC
as a monitor during the operation.
u
Laser Marker Smart Utility software
(Attached CD-ROM)
This software contains the laser marker configuration software
“Laser Marker NAVI smart” and PDF manual data.
ME-LPRF-SM-11