Panasonic LP-RF Series, Setup & Maintenance Manual

Page: 156 / 218

156
6-2-3 Connection
„
Connection method
Connect the code reader to the RS-232C port on the controller.
RS-232C port
Laser marker side
connector specifications:
D-sub 9-pin female
Code reader Rear of controller
• Do not connect to other than three lines RxD (RD), TxD (SD) and GND to the laser marker.
• Use the RS-232C cross cable to connect the code reader and laser marker, referring to the example below.
Connection example
TxD
RxD
GND
2
3
5
TxD
RxD
GND
2
3
5
2
3
5
2
3
5
D-sub 9-pin female
Laser marker
RS-232C port
Example of connection cables
Cross cable
Terminal No. Terminal No. Terminal No. Terminal No. Signal Signal
Code reader side
Example of RS-232C port
D-sub 9-pin female
D-sub 9-pin male D-sub 9-pin male
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For RS-232C port specifications, refer to “5-2 RS-232C” (P.128).
ME-LPRF-SM-11