manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 201

1.17.8  Built-in Simplified Voice Message (SVM)

Description

Installing an optional Simplified Voice Message (ESVM) card in the PBX allows the PBX to provide answering
machine features.

Features for an extension user with a message box:

An extension user can record a personal greeting message to greet a caller and ask him to leave a voice
message. The user can also play back and clear greeting messages and the voice messages left by callers.

Feature for a caller:

A caller can leave a voice message after hearing the greeting message.

ESVM2/ESVM4 Card

An ESVM card can be used either for the SVM feature, for the OGM feature (

®

 1.17.5  Outgoing Message

(OGM)), or both.
An ESVM4 card (4 channels) contains two separate blocks of data, and is the equivalent of installing two
ESVM2 cards.
Only up to 2 cards (max. 8 channels) can be used for the SVM feature per system. In this case, each card is
assigned a floating extension number (default: 591 for SVM card 1, and 592 for SVM card 2). The rest of the
channels must be used for OGM feature purposes.
When using an ESVM card for the SVM feature, it must be mounted on sub-slot 3 (highest slot) of the OPB3
card.

[Example]

Message Box for

Extn. 101

Message Box for

Extn. 102

Message Box for

Extn. 301

Message Box for

Extn. 105

Message Box for

Extn. 104

Message Box for

Extn. 210

Message Box for

Extn. 103

SVM Card 1 (ESVM4): Floating Extension No. 591 (example)

SVM Card 2 (ESVM2): Floating Extension No. 592 (example)

Block A

Block B

PBX

2 CH

2 CH

2 CH

Message Recording Limit

Up to 250 (ESVM2/ESVM4) messages (greeting messages and voice messages for extensions) with a
maximum total recording time of 60 minutes (default) can be recorded per card/block. This memory is shared
between the message boxes of all extensions assigned to that card/block. The recording quality, which can
be selected through system programming, determines the total recording time as follows:

Feature Guide

201

1.17.8 Built-in Simplified Voice Message (SVM)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands