manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 187

1.17.5  Outgoing Message (OGM)

Description

An extension assigned as the manager (manager extension) can record outgoing messages (OGMs) for the
following features:

Feature

Usage & Reference

Direct Inward System Access
(DISA)

When a call arrives on a DISA line, the caller will hear a message.

®

 1.17.6  Direct Inward System Access (DISA)

Queuing Feature

If assigned in the Queuing Time Table of the incoming call distribution
group, any caller who is waiting in a queue will hear a message.

®

 1.2.2.4  Queuing Feature

Timed Reminder

When answering the Timed Reminder Alarm, the user will hear a
message.

®

 1.28.4  Timed Reminder

Conditions

•

Hardware Requirement:

 An OPB card, and MSG4 card, ESVM2 card or ESVM4 card

•

Number of Messages

A maximum of 64 messages can be recorded.

•

A floating extension number is assigned to each outgoing message (OGM) (default: 5 + two-digit OGM
number).

•

One MSG4 or ESVM4 card allows four messages to play simultaneously, and one ESVM2 card allows two
messages to play simultaneously. Increasing the number of cards does not increase the total recording
time or the number of messages; it increases the number of messages that can be played simultaneously.

[Example]

Up to 

4

 messages can be 

played simultaneously to 
callers.

PBX

MSG 
Card

Total message recording time: 

8 minutes max.

Up to 

8

 messages can be 

played simultaneously to 
callers.

PBX

Total message recording time: 

8 minutes max.

MSG 
Card

MSG 
Card

The maximum recording time for each card depends on the recording quality and the type of card used,
as follows:

Recording Quality

Recording Time with the

ESVM2/ESVM4 Card

Recording Time with the MSG4

Card

High

(default)

about 20 minutes

about 8 minutes

Middle

about 60 minutes

about 8 minutes

Feature Guide

187

1.17.5 Outgoing Message (OGM)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands