manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 195

No

No

No

Yes

Yes

The message for 
busy is sent to the 
caller.

F

The call is routed to 
the intercept destination.
(Intercept Routing   Busy)

G

The call is disconnected.

A

Yes

Does the caller 

press     while hearing a busy 

tone (Call Retry)?

(Busy Tone / 
DND Tone 
Continuation 
time 

expires

)

Is an Intercept 

Routing   Busy destination

assigned?

Is a DISA Busy

Message assigned?

Busy tone 

OGM

Intercept Routing

Busy tone

What method is assigned 
for DISA Intercept          
Routing   DND?   

The call is disconnected.

No

A

The call is routed to 
the intercept destination.
(Intercept Routing   DND)

Yes

G

Does the caller 

press     while hearing a busy 

tone (Call Retry)?

The message for 
the DND mode is 
sent to the caller.

F

(Busy Tone / 
DND Tone 
Continuation 
time 

expires

)

Continued from previous page

Continued from previous page

Conditions

CAUTION

There is a risk that fraudulent telephone calls will be made using the Trunk-to-Trunk Call feature of DISA.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:

a.

Enabling DISA security (Trunk Security or All Security).

b.

Keeping passwords (verification code PINs/extension PINs) secret.

c.

Selecting complex, random PINs that cannot be easily guessed.

d.

Changing PINs regularly.

•

Hardware Requirement:

 An OPB card, and MSG4 card, ESVM2 card or ESVM4 card

•

DISA Delayed Answer Time

It is possible to set the Delayed Answer time so that the caller will hear a ringback tone within a
preprogrammed time period first before hearing an outgoing message (OGM).

→

4.4  [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—

Recall—Hold Recall

→

[209] DISA Delayed Answer Time

•

Call Retry

While hearing a ringback, reorder, or busy tone, retrying the call is possible by pressing " ". System
programming selects whether pressing " " during a trunk-to-trunk conversation returns to the DISA top
menu or sends a DTMF tone.

•

DISA Mute Time

It is possible to set the Mute time until the outgoing message (OGM) plays and the PBX starts to receive
the DTMF signalling after the caller reaches the DISA line.

Feature Guide

195

1.17.6 Direct Inward System Access (DISA)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands