manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 240

1.21.1.3  Advice of Charge (AOC)

Description

The PBX can receive the call charge information on ISDN lines from the telephone company.
There are the following types:

Type

Description

Advice of Charge During
Call (AOC-D)

AOC is received during the call and when the call is completed.

Advice of Charge
At End of Call (AOC-E)

AOC is received when the call is completed.

Conditions

•

This feature complies with the following European Telecommunication Standard (ETS) specification:

–

ETS 300 182 Advice of Charge (AOC) supplementary service Digital Subscriber Signalling System No.
One (DSS1) protocol.

•

A DPT user can see the call charge information on the display during the call.

•

Budget Management

If the amount of call charge reaches the preprogrammed limit, an extension user cannot make further calls.
(

®

 1.9.2  Budget Management)

•

AOC for ISDN extension

An ISDN extension also receives AOC.

PC Programming Manual References

3.13  [1-1] Slot—Port Property - BRI Port—Supplementary Service—

COLP, CLIR, COLR, CNIP, CONP,

CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
3.15  [1-1] Slot—Port Property - PRI Port—Supplementary Service—

COLP, CLIR, COLR, CNIP, CONP,

CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY

240

Feature Guide

1.21.1 Integrated Services Digital Network (ISDN)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands