manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 386

2.3  System Data Control

2.3.1  PC Programming

Description

This PBX can be programmed and administered using a PC. There are two programming methods:

1.

On-site Programming:

 System programming/diagnosis can be performed locally by connecting a PC to

the PBX directly.

2.

Remote Programming:

 System programming/diagnosis and data upload can be performed from a remote

location.

1.

On-site Programming:

Method

Description

Using the Serial Interface
(RS-232C) port

The PBX has a Serial Interface (RS-232C) port which can be used
for either system administration or SMDR (

®

 1.26.1  Station

Message Detail Recording (SMDR)).

Using the USB port

The PC is connected to the USB port of the PBX, or a USB port (USB
Module) attached to a DPT.

Using the LAN interface

A CTI-LINK card must be installed.

Using a modem through
an SLT port

*1

An RMT card must be installed. Assign the floating extension number
of the analogue remote maintenance (default: 599), and dial this
number from the PC to connect to the PBX.

Using an ISDN TA
interface (64 kbps)
through an ISDN
Extension Line

*1

Assign the floating extension number of the ISDN remote
maintenance (default: 699), and dial this number from the PC to
connect to the PBX. The RMT card is not required for this method.
This method is available only when a user-supplied ISDN TA that
supports CAPI is used.

*1

If remote access is disabled through system programming, then this on site programming cannot be done.

2.

Remote Programming:

Method

Description

Using a modem (RMT card)

An RMT card must be installed. The floating extension number of
the analogue remote maintenance must be assigned (default: 599).
PC programming, using a telephone connected in parallel with the
modem, can be done in the following ways:

•

Direct Access

Dial the DIL/DID/DDI number whose destination is the floating
extension number of the analogue remote maintenance.

•

Through DISA

Dial the floating extension number of the analogue remote
maintenance using the DISA feature. (

®

 1.17.6  Direct Inward

System Access (DISA))

•

Call Transfer

Call an extension (probably the operator), and request a transfer
to the floating extension number of the analogue remote
maintenance. (

®

 1.12.1  Call Transfer)

386

Feature Guide

2.3.1 PC Programming

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands