manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 82

1.5  Making Call Features

1.5.1  Predialling

Description

A display PT user can check and correct the entered number before it is dialled, while on-hook. The call will
be initiated after going off-hook.

Conditions

•

Storing the Predialled Number in the Personal Speed Dialling

The predialled number can be stored in the Personal Speed Dialling by pressing the AUTO DIAL/STORE
button. (

®

 1.6.1.5  Speed Dialling—Personal/System) In this case, the extension will enter into the personal

programming mode automatically so that a name can be assigned for the stored number.

User Manual References

3.1.2  Settings on the Programming Mode

82

Feature Guide

1.5.1 Predialling

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands