manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 28

1.1.1.6  Intercept Routing

Description

Provides automatic redirection of incoming trunk and intercom calls. There are three types of Intercept Routing
as follows:

Feature

Description

Intercept Routing—No Answer
(IRNA)

If a called party does not answer a call within a preprogrammed time
period (IRNA Timer), the call is redirected to the preprogrammed
destination.

Intercept Routing—Busy

If a called party is already handling a call, new calls are handled as
follows:

–

The call is redirected to the preprogrammed Intercept Routing—
Busy destination.

–

If an Intercept Routing—Busy destination is not enabled, the
caller will hear a busy tone. However, if the call is made through
an LCOT/CLCOT or T1 [LCOT/GCOT] card, the caller hears a
ringback tone.

Intercept Routing—DND

If a called party is in DND mode, the call is redirected to the
preprogrammed destination.

Intercept destinations can be assigned to extension ports.

®

 6.1  [4-1-1] Wired Extension—Extension Settings—Intercept Destination—

Intercept Destination—When

called party does not answer—Day, Lunch, Break, Night

®

 6.10  [4-2-1] Portable Station—Extension Settings—Intercept Destination—

Intercept Destination—When

called party does not answer—Day, Lunch, Break, Night

®

 [604] Extension Intercept Destination

When the original destination is:

The Available Intercept Destination is:

•

Wired Extension (PT/SLT/T1-OPX)

•

PS

The destination assigned to the original extension.

6.1  [4-1-1] Wired Extension—Extension Settings—
Intercept Destination

→

Intercept Destination—When called party

does not answer—Day, Lunch, Break, Night

→

Intercept Destination—When Called Party is

Busy

6.10  [4-2-1] Portable Station—Extension Settings—
Intercept Destination

→

Intercept Destination—When called party

does not answer—Day, Lunch, Break, Night

→

Intercept Destination—When Called Party is

Busy

®

 [604] Extension Intercept Destination

28

Feature Guide

1.1.1 Incoming Trunk Call Features

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands