manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 259

Conditions

•

It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directly to
the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting) on
the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on the extension.

•

One-touch Voice Mail Feature Access

It is possible to assign a One-touch Dialling button for direct access to a Voice Mail feature. (

®

1.6.1.2  One-touch Dialling) For example, to access a mailbox (mailbox number 123) of the VPS (extension
number 165) directly, assign "

165

#6

123

" to a One-touch Dialling button. When pressing this button, the

outgoing message (OGM) of the mailbox will be heard.

•

All ports in a VM (DPT) group must be connected to a single DLC card.

PC Programming Manual References

3.4  [1-1] Slot—Port Property - Extension Port

→

DPT Type—Type

→

DPT Type—VM Unit No.

→

DPT Type—VM Port No.

5.19  [3-7-1] VM(DPT) Group—System Settings
5.20  [3-7-2] VM(DPT) Group—Unit Settings
5.22  [3-8-1] VM(DTMF) Group—System Settings
5.23  [3-8-2] VM(DTMF) Group—Group Settings

PT Programming Manual References

[601] Terminal Device Assignment
[660] VM Group Floating Extension Number

Feature Guide References

1.24.2  Voice Mail DTMF Integration
1.24.3  Voice Mail DPT (Digital) Integration
3.1  Capacity of System Resources

Feature Guide

259

1.24.1 Voice Mail (VM) Group

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands