manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 358

•

If the status of a PS is set to Out of Range at all PBXs that it is registered to, the call will be redirected to
the overflow destination of the ICD Group.

•

Handover from one PBX to another PBX during a conversation is not possible.

PC Programming Manual References

4.4  [2-3] Timers & Counters—Miscellaneous—

System Wireless—PS Out of Range Timer

4.17  [2-9] System Options—Option 4—

System Wireless—Out of Range Registration

Feature Guide References

1.2.2.3  Outside Destinations in Incoming Call Distribution Group

358

Feature Guide

1.30.6 Network ICD Group

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands