manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 33

1.1.1.7  Intercept Routing—No Destination

Description

Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX).

Conditions

•

Intercept Routing—No Destination on/off

The Intercept Routing—No Destination feature can be enabled or disabled through system programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination feature
always functions for calls through the LCOT/CLCOT, or T1 (LCOT/GCOT) card even when disabled.

•

If an operator (tenant/PBX) is not assigned:

The extension connected to the lowest-numbered jack will be the intercept destination.

•

Intercept Routing—No Destination also applies to calls from doorphones.

PC Programming Manual References

4.3  [2-2] Operator & BGM—

PBX Operator—Day, Lunch, Break, Night

12.7  [10-5] Miscellaneous—

Intercept—Routing to Operator - No Destination (Destination is not

programmed.)

PT Programming Manual References

[006] Operator Assignment

Feature Guide References

2.2.5  Operator Features

Feature Guide

33

1.1.1 Incoming Trunk Call Features

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands