manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 406

2.4.2  Power Failure Restart

Description

When turning the electricity back on, the PBX restarts the stored data automatically and the PBX will record
the event (System Restart) in the error log.

Conditions

•

In the event of a power failure, PBX memory is protected by a factory-provided lithium battery. There is no
memory loss except the memories of Automatic Callback Busy (Camp-on) (

®

 1.8.1  Automatic Callback

Busy (Camp-on)) and Call Park (

®

 1.13.2  Call Park).

406

Feature Guide

2.4.2 Power Failure Restart

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands