manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 151

1.11.4  Headset Operation

Description

This PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting the
handset. This feature is also known as Handset/Headset Selection.
For connection and operation, refer to the Operating Instructions for the headset.

Conditions

•

Hardware Requirement:

 An optional headset.

•

If headset mode is on, pressing the SP-PHONE button activates the headset, not the built-in speaker.

•

To set headset mode on a DPT, use personal programming (Headset Operation) or press the Headset
button.

•

Headset Button

A flexible button on a DPT can be customised as a Headset button.

•

Answer/Release Button

A flexible button can be customised as an Answer button or a Release button. Such buttons are useful for
headset operation. It is possible to answer an incoming call by pressing an Answer button. While hearing
the Call Waiting tone during a conversation, pressing an Answer button enables one to answer the second
call by placing the current call on hold. Pressing a Release button enables one to disconnect the line during
or after conversation, or to complete a Call Transfer.

•

It is possible to switch from headset mode to hands-free mode or vice versa during a conversation by
pressing the Headset button.

•

Headset users cannot use the following features:

–

Automatic Redial (

®

 1.6.1.4  Last Number Redial)

–

Receiving OHCA (

®

 1.8.4.3  Off-hook Call Announcement (OHCA))

–

Receiving Whisper OHCA (

®

 1.8.4.4  Whisper OHCA)

PC Programming Manual References

3.4  [1-1] Slot—Port Property - Extension Port—

Headset OFF/ON

3.37  [1-1] Slot—Port Property - IP-Extension Port—IP-PT Registration and De-registration—

Headset OFF/

ON
6.5  [4-1-4] Wired Extension—Flexible Button—

Type

6.17  [4-3] DSS Console—

Type

Feature Guide References

1.20.2  Flexible Buttons

User Manual References

1.3.5  Using the Answer/Release Button
1.4.8  Using the Headset (Headset Operation)
3.1.2  Settings on the Programming Mode

Feature Guide

151

1.11.4 Headset Operation

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands