manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 126

1.8.4.4  Whisper OHCA

Description

An extension user can send a spoken message to a busy extension that will be heard directly by only the called
extension user, through the handset, without interrupting the ongoing conversation. The caller cannot hear the
ongoing conversation or the called extension user’s reply, unless the called extension user puts the current
party on hold and switches to the waiting caller.

Conditions

•

COS programming determines which extensions can use this feature.

•

This feature is available when the calling and called extension use one of the following telephones:

–

KX-DT300 series

–

KX-T7600 series

–

IP-PT

•

If the Whisper OHCA feature cannot be used due to COS or telephone type, the Call Waiting tone will be
sent to the called extension. (

®

 1.8.4.2  Call Waiting Tone)

•

If the called extension does not use a KX-DT300 or KX-T7600 series telephone or an IP-PT, but forces
Whisper OHCA, the announcement may be heard by the other party.

•

It is possible to enable Whisper OHCA on any telephone. However, it may not work properly. (e.g., The
voice may be heard by the other party.)

•

While an extension is receiving Whisper OHCA, if the extension user places the current trunk call on hold
or transfers the current intercom call or trunk call, Whisper OHCA will become disabled and the calling
extension will start to hear a ringback tone.

•

While an extension is receiving Whisper OHCA, if the extension user places the current intercom call on
hold, the called extension can talk to the calling extension through the handset.

PC Programming Manual References

4.10  [2-6-3] Numbering Plan—B/NA DND Call Feature

→

BSS / OHCA / Whisper OHCA / DND Override

→

BSS / OHCA / Whisper OHCA / DND Override-2

4.11  [2-7-1] Class of Service—COS Settings—Extension Feature—

OHCA / Whisper OHCA

Feature Guide References

2.2.1  Class of Service (COS)

User Manual References

1.8.3  Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)

126

Feature Guide

1.8.4 Second Call Notification to Busy Extension

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands