manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 359

1.31  IP Proprietary Telephone (IP-PT) Features

1.31.1  IP Proprietary Telephone (IP-PT)

Description

This PBX supports the connection of IP proprietary telephones (IP-PTs), which function almost identically to
normal PTs. However, they connect to the PBX over a Local Area Network (LAN), and send and receive calls
using Internet Protocol (IP).
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX through
a network hub or other splitting device, and can have a PC connected to the secondary Ethernet port.

[Connection Example]

Primary
Ethernet Port

Secondary
Ethernet Port

IP-EXT

PBX

PC

IP-PT

Private IP

Network

Main Office

Branch Office

IP-PT

IP-PT

Conditions

•

Hardware Requirement:

 An IP-EXT card

•

IP-PT registration is required through system programming before an IP-PT can be used with the PBX. An
IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-PTs, refer
to the Information about IP Proprietary Telephones leaflet.

•

The following features cannot be used with an IP-PT:

–

Digital XDP (

®

 1.11.9  Parallelled Telephone)

–

OHCA (

®

 1.8.4.3  Off-hook Call Announcement (OHCA))

–

Using PC Phone or PC Console on a connected PC (

®

 1.32.2  PC Phone/PC Console)

•

The KX-NT265 does not have a secondary Ethernet port.

•

The following optional devices are available for the KX-NT300 series (except KX-NT321) IP-PT:

–

KX-NT307(PSLP1528) Bluetooth Module

–

KX-NT303 Add-on 12 Key Module (not available for KX-NT366)

•

KX-NT307(PSLP1528) Bluetooth Module

A Bluetooth wireless headset can be registered to an KX-NT300 series (except KX-NT321) IP-PT
containing the KX-NT307(PSLP1528) Bluetooth Module through personal programming. When Headset
Mode is off, the Bluetooth headset can be used to answer calls or redial. In this case, Headset Mode will
turn on automatically, and will turn off after you hang up.
This Bluetooth Module is also compatible with KX-DT343/KX-DT346 DPTs.

•

Calls made using a Bluetooth wireless headset will not be disconnected immediately when the user
wanders out of range. However, if the Bluetooth wireless headset user remains out of range for a specified
time period, the call will be disconnected.

Feature Guide

359

1.31.1 IP Proprietary Telephone (IP-PT)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands