manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 67

1.3.1.2  Call Forwarding (FWD)

Description

Extensions and incoming call distribution groups can forward their calls to preset destinations. There are
several different types of forwarding, and the circumstances under which the calls are forwarded for each type
differ as follows:

Type

Circumstance

All Calls

Any time

Follow Me:

When an extension user fails to set this feature before leaving the
desk, this feature can be set from the destination extension.

Busy

When the extension user’s line is busy.

No Answer

When the extension user does not answer within a preprogrammed
time.

Busy/No Answer

When the extension user’s line is busy or the user does not answer
within a preprogrammed time.

Depending on the type of incoming intercom or trunk calls, it is possible to set a different destination for each.

Intercom Calls 
to Extension

Trunk Calls to 
Extension

Forwards to 
Another Extension

Intercom Calls 
to Extension

Available Forwarding Type: 

Forwards to 
Outside Party

Extension

Intercom Calls to 
Incoming Call 
Distribution Group

Trunk Calls to 
Incoming Call 
Distribution Group

Forwards to 
Another Extension

Forwards to 
Outside Party

Available Forwarding Type: All Calls

Incoming Call Distribution Group

All Calls
Busy
No Answer
Busy/No Answer

Feature Guide

67

1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands