manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 318

<PBX Code Method (Access with PBX Code)>

TIE Line Network

TIE Line

952-9-211-4567

211-4567

Outside Party

Interface

Extn. 1011

Trunk

Trunk

Dials "9-211-4567".

(211-4567)

Telephone Company

PBX-1

PBX Code 951

PBX-2

PBX Code 952

Interface

TRG 2 

Extn. 1011

Explanation:
1.

Extension 1011 of PBX-1 dials the Idle Line Access number of PBX-1 "9" and telephone number
"211-4567".

2.

PBX-1 modifies the call (adds "952" and the Idle Line Access number of PBX-2 "9") and sends the
call to PBX-2 which has PBX code "952" through the TIE line (trunk group [TRG] 2) according to
the ARS programming of PBX-1.

3.

PBX-2 sends the call to the outside party "211-4567".

c.

Blocking trunk calls made through another PBX and how to override it:

Whether an incoming TIE line call can make a trunk call through this PBX (i.e., PBX-2), depends on
the COS that is assigned to the trunk group of this PBX, that the incoming TIE line is connected to. If
the COS of the trunk group is unable to make outgoing calls by the Toll Restriction/Barring feature or
External Call Block feature, trunk calls made through this PBX will be prohibited.
To override this prohibition, an extension of PBX-1 must enter a verification code assigned to PBX-2
to change the COS temporarily. It is also possible to override the prohibition by specifying an extension
at PBX-2 with the Walking COS feature, to temporarily switch to that extension’s COS.

®

 4.11  [2-7-1] Class of Service—COS Settings—TRS—

TRS Level—Day, Lunch, Break, Night

®

 4.12  [2-7-2] Class of Service—External Call Block

®

 5.1  [3-1-1] Trunk Group—TRG Settings—Main—

COS

®

 8.3  [6-3] Verification Code

®

 [500] Trunk Group Number

318

Feature Guide

1.30.1 TIE Line Service

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands