manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 345

1.30.4.5  Completion of Calls to Busy Subscriber (CCBS)—by QSIG

Description

If the call has been made to an extension in another PBX in QSIG network and the called party is busy, an
extension user can set to receive callback ringing when the called party becomes free. When the user answers
the callback ringing, that party’s number is automatically dialled.

Conditions

•

This feature complies with European Telecommunication Standard (ETS) specification ETS 300 366, Call
completion supplementary services.

•

This feature is available under the following conditions:

a.

The caller’s PBX is capable of using CCBS.

b.

The called party’s PBX is capable of accepting CCBS.

•

To receive and send CCBS, receiving and sending CCBS must be enabled individually on an ISDN (QSIG)
port basis through system programming.

•

An extension user can set only one CCBS. The last setting is effective.

•

The CCBS setting is cancelled if there is no callback ringing within 60 minutes or callback ringing is not
answered within 10 seconds.

PC Programming Manual References

3.13  [1-1] Slot—Port Property - BRI Port—Supplementary Service—

COLP, CLIR, COLR, CNIP, CONP,

CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
3.15  [1-1] Slot—Port Property - PRI Port—Supplementary Service—

COLP, CLIR, COLR, CNIP, CONP,

CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY

User Manual References

1.2.4  When the Dialled Line is Busy or There is No Answer

Feature Guide

345

1.30.4 QSIG Standard Features

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands