manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 225

Button

Usage

Wrap-up

*1

Used to switch the Wrap-up/Not Ready and Ready modes.

System Alarm

Used to confirm a PBX error.

Time Service

*1

Used to switch the assigned time modes: day, lunch, break or night.
Also used to check the current time mode status.

Answer

Used to answer an incoming call.

Release

Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.

Toll Restriction/Call Barring

Used to change the TRS/Barring level of other extension users
temporarily.

ISDN Service

Used to access an ISDN service.

Calling Line Identification
Restriction (CLIR)

*1

Used to switch between the CLIP and CLIR service.

Connected Line Identification
Restriction (COLR)

*1

Used to switch between the COLP and COLR service.

ISDN Hold

Used to transfer a call using the telephone company.

Headset

Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset modes
during a conversation.

Time Service Switching Mode
(Automatic/Manual)

*1

Used to switch between the Automatic Switching and Manual
Switching mode.

Two-way Record

Used to record a conversation into your own mailbox.

Two-way Transfer

Used to record a conversation into the mailbox of a specified
extension.

One-touch Two-way Transfer

Used to record a conversation into the mailbox of a specified
extension with one touch.

Live Call Screening (LCS)

Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.

Voice Mail (VM) Transfer

Used to transfer a call to the mailbox of a specified extension.

Check-in

Used to switch the status of extensions from Check-out to Check-in.

Check-out

Used to switch the status of extensions from Check-in to Check-out.

Cleaned-up

Used to switch the room status of extensions between Ready and
Not Ready.

CTI

Used to access CTI features.

Primary Directory Number (PDN)

Used to make and receive both outside and intercom calls.
(

®

 1.7.1  Primary Directory Number (PDN)/Secondary Directory

Number (SDN) Extension)

Feature Guide

225

1.20.2 Flexible Buttons

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands