manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 44

Destination

Availability

VM Group (DTMF/DPT)

ü

External Pager (TAFAS)

ü

DISA

ü

Analogue/ISDN Remote Maintenance

ü

Idle Line Access no. + Phone no.

ü

Trunk Group Access no. + Trunk Group no. + Phone no.

ü

Other PBX Extension (TIE with no PBX Code)

ü

Other PBX Extension (TIE with PBX Code)

ü

•

FWD/DND Mode

While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.

PC Programming Manual References

5.17  [3-6] Extension Hunting Group
5.18  [3-6] Extension Hunting Group—Member List

PT Programming Manual References

[680] Idle Extension Hunting Type
[681] Idle Extension Hunting Group Member

Feature Guide References

1.3.1  Call Forwarding (FWD)/Do Not Disturb (DND)
3.1  Capacity of System Resources

44

Feature Guide

1.2.1 Idle Extension Hunting

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands